**IN STORE PICK UP ONLY**
ALL THE TRAVEL AND MX WHEELS
Load up the van, hit the road, climb a mountain, hammer it back down, huck the gap, throw the bike back in the van, drive to the bike park and do laps on laps. Hell, you could even rock up to the startline of the world's wildest races. The Nomad’s forte is being ready and willing to go wherever, whenever. The only thing it needs is a rider willing to press send.
170mm travel
All the travel anyone needs in a single-crown bike intended for the steepest and deepest of trails.
Glovebox
Place your ride essentials securely beneath a new high-quality latch and panel in the Nomad's downtube. The Glovebox comes with a fitted Tool Wallet and Tube Purse to keep your tools close to hand.
Proportional geometry
Chainstay length and seat angle are matched to the frame size (STA steepens and rear centre grows as frame size increases) so that every rider, no matter what height, gets the same balance of geometry and handling characteristics.
MX wheels
The mixed wheel configuration of a 29-inch wheel up front provides traction and stability, while the 27.5-inch rear wheel allows for quick back wheel steering and lifting. Mixing the best of both worlds.
Flip your chip
In the Low position, the shock rate becomes more progressive, particularly at the end of the stroke, and there’s some bottom-out resistance to be gained. In the High setting, the bike rides a little higher in its travel and supplies the rider with more mid-stroke support.
Frame stiffness tuned by size
Bigger riders means bigger stresses on bigger frames. So we tailor stiffness for every size to make sure everyone gets the same ride quality.
Details matter
The details are completed by a neat mud flap to protect the rear shock plus tidy cable routing within the frame and swingarm, and rubberized DT protectors to shrug off strikes.
Features:
-
Wheel size: MX
-
Front travel: 170mm
-
Rear travel: 170mm
- Fox DHX2 Coil Shock 230x65mm
Specifications:
| Suspension System |
VPP |
| Front Derailleur |
No compatibility |
| Headset/Headtube |
Integrated (IS41/52) |
| Seat Post |
31.6mm |
| Seat Clamp |
36.4mm |
| Eye to Eye length |
230mm |
| Stroke |
65mm |
| Fork Compatibility |
170-180mm |
| BB Shell |
73mm Threaded |
| Max Tire Size |
2.5" |
| Water Bottle Mounts |
1 |
| Shock Mounting Bushing Front |
30x8 |
| Shock Mounting Bushing Rear |
30x8 |
| Brake Mount |
200 PM |
| Fork Offset |
44mm |
