27.5″ WHEELS / 165MM REAR / 170MM FRONT
The Revel team created the Rail with two things in mind: maximum thrills and climbing hills. A tuned carbon layup makes railing through berms pure joy. The Rail will put an end to the traditional trail bike compromises to ascent efficiency to which you’ve grown accustomed. The Canfield Balance Formula is the heart of every Revel bike, which maximizes the amount you pedal in the sweet spot and keeps the suspension wildly active while descending and braking.
CBF Suspesion Design
CBF™ focuses on designing rear suspension around the Center of Curvature (CC). Until now, most suspension systems have focused solely on the instant center. CBF points the chainline and corresponding drive forces around the top of the chainring through 100-percent of the travel resulting in maximum pedaling efficiency, regardless of where you are in the travel, what terrain you are on or what kind of power you’re putting down. All the power you put into the pedals goes into turning the rear wheel, allowing the suspension to do its job completely independent of drivetrain and braking forces and making the sag setting much less critical. When we first rode the largely-unknown CBF system, we knew it was something special, and we knew we could make the best riding carbon mountain bikes using this magical formula.
Click here for all Revel Bike Tech
Specifications:
| Wheel Size |
27.5”(650b) |
| Front Travel |
170mm |
| Rear Travel |
165mm |
| Shock Spec |
230×65-22.2 x 8 Hardware Spec |
| Boost Axles |
148mm rear / 110mm front |
| Seatpost Diameter |
31.6mm |
| Seatpost Insertion Depth |
SM (260mm), MD (275mm), LG (290mm), XL (305mm) |
| Bearings |
BOLU 6801 VRS full complement, 12mm x 21mm x 5mm 18pcs per bike |
| Rear Brake |
180mm post mount / 203mm max |
| Tire Clearance |
27.5×2.5″ (CEN Standard: 2.4″) |
| Bottom Bracket |
Threaded (73mm English threaded) |
| Max Chainring |
34T Round / 32T Oval, 52mm Chainline |
| Chainguide |
Custom Revel guide included |
| Tapered Headtube |
IS42 upper / IS52 lower |
| Colors |
Tuxedo Penguin/ Mint Chocolate Chip/ Tang |
| Sizes |
S / M / L / XL |
| Frame Warranty |
Lifetime Warranty |
Build Kit:
| Frame – Revel Rail 27.5″ 165mm travel |
| Fork – RockShox Lyrik Ultimate RC2 170mm |
| Shock – RockShox Super Deluxe Ultimate (*upgrade available) |
| Headset – Cane Creek 40-series |
| Tubeless – Stans No tubes Single shots x2 |
| Tires – Maxxis Minion DHF 2.5″ EXO+ Front, Maxxis Minion DHR 2.4″ EXO+ Rear |
| Bar – ENVE M7 Carbon 35 x 800mm |
| Stem – ENVE M7 Carbon 35 x 40mm |
| Post – Rockshox Reverb Stealth AXS |
| SM (125mm), MD (150mm), LG/XL (170mm) |
| Saddle – WTB Volt CroMo Black |
| Shifter – SRAM AXS Eagle Controller |
| Brakes – SRAM Code RSC |
| Rotors – SRAM Centerline 180mm front & rear |
| Rear Derailleur – SRAM XX1 AXS Eagle |
| Chain – SRAM XX1 Eagle |
| Cassette – SRAM XX1 Eagle 10-52 |
| Crankset – SRAM XX1 Carbon DUB 170mm |
| Bottom Bracket – SRAM Threaded DUB 73mm BSA Standard |
| Grips – Lizard Skins Charger Evo Grip Black |
| **Specifications Subject to change without notice** |
Geometry & Sizing
The Rail is a true modern bike, perfected by a group of bike nerds (revelers) to just the right angles. We took “long, low, and slack” and made it just right. The Rail puts your body in a position ready to bomb through the trail ahead with a long wheelbase that balances stability and cornering prowess. The BB height balances the ability to rail a corner and limit pedal strikes. The head angle is perfect for 27.5” wheels that are ready to tackle anything in the trail ahead.
Click Here for Geometry & Sizing Chart
Click here for all Revel Bike Tech
