You can run overbuilt, chunky tires; you can run light, big volume fast tires, but whatever you run, know that you’re not limited by width.
Tired of hitting “purchase” on another set of bearings each season? So were we. That’s why we use bushings where they make sense, and bearings where they don’t. The IGUS bushings in our lower link are lighter, stiffer, and virtually maintenance free. We believe so strongly in them, we back them with a free lifetime replacement.
LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE
All our bikes are built from the highest grade materials and optimized for the best strength, weight, stiffness, and ride performance — no matter how much you spend. The Ripmo weighs a svelte 6.25 lbs with a DPX2 shock and complete builds start at 28 lbs.
INTERNAL CABLE ROUTING
Bikes that look pretty on the outside, should look pretty on the inside. We use carbon fiber tubes molded within each frame. Push the cable in, watch it pop out, a beautiful moment indeed.
REMOVABLE ISCG MOUNT
So, you’re too fast for narrow-wide chain retention on its own? Challenge accepted. Our removable ISCG tabs allow shredders to bolt on a chain guide, while the rest of us can shave grams.
PROTECT YOUR INVESTMENT
A thick rubber downtube protector deflects debris, while our chainstay protector features thick raised sections to help dampen chain slap noise. And our simple-yet-elegant linkage protectors stop mud and rocks thrown by the tire, keeping your beautiful bike beautiful.
LIFETIME WARRANTY
If it’s our fault, we’ll fix it. Simple as that.
Specifications:
| Version |
V2S |
| Model Version |
Ripmo V2S |
| Frame Material |
Carbon front and rear triangle |
| Frame Weight |
6.3 lbs / 2.86 kg w/ DPX2, 6.74 lbs / 3.09 kg w/ X2 |
| Complete Build Weight |
Starting at 28.2 lbs |
| Wheel Size |
29” / up to 2.5" tires |
| Front Travel |
160mm |
| Rear Travel |
147mm |
| Shock Specs |
210 x 55mm |
| Boost Axles |
148mm rear / 110mm front |
| Seatpost Diameter |
31.6mm |
| Rear Brake |
180mm Post mount / 203mm max rotor |
| Chainstay Length |
435mm |
| Bottom Bracket |
Threaded (73mm BSA) |
| Chainline |
55mm chainline, 182mm Q Factor |
| Derailleur Hanger |
SRAM UDH |
| ISCG 05 Compatible |
ISCG 05 Tab Mount available separately |
| Headset |
ZS44 upper / ZS56 lower |
| Colors |
EnduroCell or Bruce Banner |
| Sizes |
S / M / L / XL |
| Frame Warranty |
Lifetime |
Build:
| Fork |
Fox Factory Series, Float 38, 160mm, 44mm offset, 29”, 110x15mm |
| Shock |
Fox Float Factory Series, X2 with EVOL, 210 x 55 |
| Wheels |
Blackbird Send Alloy (Send I front, Send II rear) / 29" / Ibis Hubs |
| Tires |
Maxxis Assegai 29” x 2.5” WT, EXO+ casing, 120tpi |
| Brakes |
SRAM G2 R, 4 piston |
| Brake Rotors |
SRAM Centerline 6 bolt 203mm/180mm |
| Cranks |
SRAM NX Eagle DUB Wide spindle, 30t Alloy Ring S/M: 170mm, L/XL: 175mm |
| Bottom Bracket |
SRAM DUB BSA |
| Rear Derailleur |
SRAM GX Eagle |
| Shift Levers |
SRAM NX Eagle |
| Cassette |
SRAM XG 1275 10-50 12 speed |
| Chain |
SRAM NX Eagle |
| Headset |
Cane Creek 40 ZS44/ZS56 |
| Grips |
Lizard Skin Charger Evo |
| Handlebar |
Blackbird Aluminum, 780mm |
| Stem |
Ibis 31.8mm S/M: 40mm, L/XL: 50mm |
| Seatpost |
KS Rage-i Dropper S: 125mm, M: 150mm, L/XL: 170mm |
| Saddle |
WTB Silverado |
