Open Cycle MIN.D 700c Road 2x (w/ FD Mount) Frameset - Ready to Paint
This is a very different OPEN yet it answers the same question: What do we want to ride? While we love pushing the envelope, we also love the classic bike aesthetic. In the MIN.D. both come together.
The joy of cycling starts even before the first pedal stroke, as you collect your MIN.D., feel its lightness, admire the sleek tube profiles, see the shimmering midnight blue, smile at the splash of color from the 4 OPEN logo colors fading into each other on the inside of the fork and chainstays.
Once on the bike, a strange combination of performance and comfort becomes apparent. Every gram of material has a function. Beyond it is nothing, other than the endless draw of roads unknown. This is the MIN.D. (MINimal Design); it exists because it’s the road bike we wanted to ride
WHAT IS THE MIN.D.?
- A high performance road bike frame using OPEN’s ultra-efficient tube shaping for power transfer, low weight & high strength
- Continuous seattube design for extreme comfort without gimmicks
- Tire clearance for modern road tires up to 32mm (since tire labelling is unreliable, always check tire clearance with the frame)
- Available in standard 2x and dedicated 1x version
- Classic, understated look in both shaping and color
The MIN.D. comes in two versions: standard and California. Same geometry, same functionality, but the latter is - you guessed it - Made In California at the Project California facility.
This R&D facility with a small factory was set up back in the day when Gerard was co-founder/owner of Cervélo. It resulted in both the R5CA and RCA models, two road frames that redefined lightweight bike frame production.
The facility’s owner/operator Don Guichard and Gerard have stayed in touch since. So when Don wanted to do a bike project again, we decided to go on a new journey to make something special.
While the two frames have a lot in common, the completely new tools and processes used in California result in a frame that is around 75 grams lighter yet stiffer in all directions except in the continuous seattube (where it actually provides even more flex than the original MIN.D. This combination makes the ride something very special.
Comfort is not about gimmicks, elastomers, electronic suspension or sub-atomic vibration damping graphene-infused nano-particles. It's about finding ways to ride further, for longer, while enjoying it.
A comfortable fit geometry comes first. Our aim is sportive (we still want to go fast) but with a realistic saddle-to-handlebar drop and reach.
Secondly, bad roads are one of the worst comfort killers, whether through cracks and potholes or simply through vibrations. Making your tires a tad larger is the most effective comfort boost while also improving rolling resistance and grip.
Finally, we create comfort through the frame shape and layup, in particular the seattube/seatmast and the seatstays.
The continuous seattube design is extremely small at 25mm diameter (30mm is normally the minimum if you want to fit in a 27.2mm seatpost). This change adds astonishing comfort to the frame. Removing the seatpost/seattube overlap at the toptube also means the seattube compliance continues uninterrupted.
Our own minimalist seattube top clamp is nearly invisible yet easily adjustable by 0-15mm and slip-proof. We even have our special MOCT saddle clamp (Measure Once Cut Twice) which is adjustable from 15-35mm. This also makes it much easier to resell your frame later on, although you probably never want to lose your MIN.D.
And don’t worry about traveling with the seatmast. We recommend the Scicon Aerocomfort 3.0 which let’s you travel without even removing the saddle (up to 80cm saddle height) or by removing the saddle+top clamp (up to 85cm saddle height). You don’t even have to remove the handlebars or twist them; all you do is remove the wheels and pack the bike. This bags fits tons of gear, rolls well and offers great protection.
It may sound weird that we consider this one of the most important features of the MIN.D. But as Dieter Rams said: “As little design as possible” (we highly recommend the documentary and the book). This is a pure road bike, and nothing more. Simply because it doesn’t have to be anything else.
NEW ROAD HANDLING
We’ve done a lot of work on steering geometry in the past five years. Some of you in the Basel area may have seen us ride around on weird concoctions with adjustable headtube angles and chainstay lengths.
The MIN.D, takes everything we’ve learned from our road bike test mule and our gravel bike on/off-road geometry experiments, putting it back into a pure road bike geometry
The OPEN U-Turn was the first fork truly optimized for flatmount brakes by deleting the standard adaptor to switch between 140mm and 160mm disc rotors (you should always use 160mm rotors anyway for added safety & control at almost no extra weight). The adaptor is a feature without a benefit at the expense of weight, stiffness and complexity.
The R-Turn uses the same Smartmount direct-mount design with thru-bolts without adaptors, just like the rear brake. Together with new shaping and a new layup optimized for road, the R-Turn is the lightest disc brake road fork available.
Note: For SRAM or Shimano, remove the adaptor and use bolts recommended for a 30mm “rear chainstay thickness”. For Campagnolo, use a “140 mm REAR" disc caliper with bolts “for 30-34 mm rear mount”.
Vertically thin chainstays and seatstays provide compliance, while their lateral width and layup ensure rock-solid propulsion. Truly the best of both worlds.
MINIMALIST TOP CLAMP
OPEN-custom seattube top clamp with micro-wedge is barely visible, just the two countersunk set screws reveal the adjustment mechanism.
RITCHEY RAIL CLAMP
Clean, simple, hassle-free, that’s why the Ritchey system is so popular. The MIN.D. comes standard with the side plates for round 7mm and 7x9.6mm oval rails.
The MIN.D, internal routing is designed for electronic groupsets from SRAM, Shimano and Campagnolo. Shimano mechanical groups with cable stop on the front derailleur and all 1x groups.
Lock bolt secures the hanger in the frame using the same threads that secure the thru axle on the other side. Simpler, lighter & optimized for the stiffest thru-axle: Syntace X-12.
Flatmount brake calipers attach directly onto the fork & frame, positioned for 160mm discs. No front or rear adaptors/spacers required.
Ready to Paint
|Frame-only size L, w/o metal parts, ±3%||
870g (RTP, incl. full mast)
|Fork-only weight, ±3%||
335g (uncut steerer)
A clearcoat is not needed for UV protection but recommended to protect against scratches and wear. Some customers leave the frame bare.
BB386EVO pressfit 86.5x46mm BB shell
Any Shimano, SRAM & Campagnolo 1x
|Any SRAM eTap|
|For Shimano 2x mechanical, please contact us|
|For Shimano Di2, the minimum achievable saddle height (due to the Di2 battery fit inside the seatmast) is listed in the geometry table below|
|(please note the seatmast inside diameter reduces above the toptube, so you need enough seatmast length to fit the Di2 battery. Check in the frame before cutting the seatmast)|
|Front derailleur mount||
Standard version with fixed, riveted FD mount and dedicated 1x version without FD mount
142x12mm superlight Carbon-Ti X-12
100x12mm superlight Carbon-Ti X-12
|Front disc rotor size||
|Front brake caliper mount||
Smartmount 160 system attaches flatmount caliper, without adaptor, for 160mm rotors
|Front brake bolts SRAM||
2x 37mm "REAR” brake bolts for 30mm “chainstay” (SRAM part# 00.5318.005.008)
|Front brake bolts Shimano||
2x 43.2mm “REAR” brake bolts for 30mm “chainstay” (Shimano part# Y8N208030)
|Front brake set-up Campagnolo||
“140mm” (rear) caliper + 160mm rotor, no adaptors, 2x 39mm "screws for 30-34 mm rear mount thickness” (Campagnolo part# AC18-DBSC39)
|Rear disc rotor size||
|Rear brake caliper mount||
Smartmount 160 system attaches flatmount caliper, without adaptor, for 160mm rotors
|Rear brake bolts SRAM||
1x 27mm (SRAM part# 00.5318.005.004), 1x 32mm (SRAM part# 00.5318.005.006)
|Rear brake bolts Shimano||
1x 33.2mm (part# Y8N208010), 1x 38.2mm (part# Y8N208020)
|Rear brake set-up Campagnolo||
“140mm” (rear) caliper +160mm rotor, no adaptors, 1x 29mm “screw for 20-24 mm rear mount thickness” (part# AC18-DBSC29), 1x 34mm “screws for 25-29 mm rear mount thickness" (part# AC18-DBSC34)
|MultiStop internal system||
Di2, eTap, EPS, 1x mechanical (all groups)
Cane Creek Integrated IS42/28.6 | OPEN-custom Integrated IS47/38 (complete set part# CAA2011K. To purchase, go here.)
Integrated mast 25mm BB to saddle (to travel with the integrated mast, we recommend the Scicon Aerocomfort 3.0)
|Seattube top clamp||
OPEN-custom saddle top clamp with micro-wedge for 25mm seat mast with 15mm adjustment (MOCT top clamp with 15-35mm adjustment available separately)
Ritchey rail clamp with side plates for round 7x7 and oval 7x9.6mm rails included
|Travel Bag Recommendation||
Scicon AeroComfort Road 3.0. Scicon has an easy WILL YOUR BIKE FIT tool. (use your current bike setup for dimensions A, B & D and use the wheelbase in our geometry chart below for dimension C).
|Indoor trainer compatibility||
Detailed information here
Brake hose installation
Torque specs & BB installation
Seatmast cutting & installation instructions
Seatmast installation video
|Max. weight (total rider+luggage)||
120kg / 264 lbs (EN/ISO/internal test standard)
Included with frameset: Headset, Seattube top clamp, Rail clamp, Thru-axles, 2 RD hangers, 2 MultiStops (Di2, eTap), cable exit stop, noise-reduction foam sleeves, bottle cage bolts, manual