695 ZR

Accessible and Upgradable

  • HM 3K Carbon frame
  • PF 30 bottom bracket shell (through adapter plates)
  • HSC 7 fork
  • E-Post integrated seatpost
  • Mechanical and Di2 + EPS compatible
Technology


CARBON FRAME

The 695 ZR (ZED READY) boasts all the LOOK technology in the frame and fork, but does without the ZED crankset and Aerostem. The frame is nevertheless still compatible with these two components and can also be fitted with any other crankset and stem. It is competition-oriented and gives you a choice from an à la carte configuration.


HSC 7 FORK

The HSC 7 fork is 15% stiffer and 16% lighter than the HSC 6.
It is 100% one-piece carbon, weighs just 295 g and complies with standard EN 14781 (144 joules frontal impact). The carbon dropouts are moulded and compressed as seamless extensions of the fork.
The tapered steering tube uses the CFD (Continuous Fibre Design) concept and enables the bearings to be located directly on the fork crown (oversize for 1½ inch bearings).
The steering tube has 2 flats and is reinforced to take the Head fit 3 headset.

HEAD FIT 3 HEADSETS + RISER

LOOK patented headset dissociating headset adjustment from stem tightening.
The headset is adjusted by tightening the carbon ring on an offset thread locked onto the steering tube. It is now possible to change stem height without altering headset adjustment. This arrangement does away with the compression kit, replaced by a simple cap. Weight savings: 40 g. The 3rd generation of the Headfit is completely integrated into the head tube thus further optimising steering precision.
The 695 ZR includes a screwed riser which secures the headset and is where the head tube meets the stem.


E-POST SEATPOST (E = ELASTOMER) WITH VARIABLE HARDNESS

1/ Anti-rotation: not being round, the E-post is therefore always aligned to the frame centreline.
2/ The seatpost is butted up against the frame.
3/ Vibration damping: via elastomers (2 internal and 1 external).
4/ Tightening consistent with carbon: 5 Nm torque is sufficient
5/ Three elastomers of varying hardness are included.
The 695 ZR is compatible with mechanical and electronic groupset configurations (Di2 et EPS). This is achieved through removable (mechanical) sheath stops (a LOOK patent). Once the mechanical stops have been removed, an adaptor kit for electronic units is included with the frame for 100% integrated routing of the harnesses (passing through the bottom bracket shell).


Technical Data
Shimano Ultegra Mechanical Groupset Specifications

FRAME / FORK 695  / HSC 7 FORK
HEADSET LOOK HEADFIT 3
SEAT POST LOOK E-POST
CRANKSET SHIMANO ULTEGRA 6800 50X34
CASSETTE SHIMANO 105 11V 11X32 5800
BRAKES / SHIFT LEVERS SHIMANO ULTEGRA 2X11V 6800
REAR DERAILLEUR SHIMANO ULTEGRA 6800
FRONT DERAILLEUR SHIMANO ULTEGRA 6800 BRAZE-ON
CHAIN SHIMANO HG600
BRAKE CALIPER  SHIMANO ULTEGRA BR6800
SADDLE SELLE ITALIA FLOW
HANDLEBAR FSA VERO COMPACT
STEM FSA OMEGA +/-6°
BAR TAPE LOOK GRIP
PEDALS N/A
WHEELS MAVIC AKSIUM
TIRES CONTINENTAL ULTRA SPORT II 700X25
WEIGHT 7.5 KG

Look Cycle 695 ZR Pro Team Complete Carbon 700c Road Bike

Brand: Look Cycle

 

695 ZR

Accessible and Upgradable

  • HM 3K Carbon frame
  • PF 30 bottom bracket shell (through adapter plates)
  • HSC 7 fork
  • E-Post integrated seatpost
  • Mechanical and Di2 + EPS compatible
Technology


CARBON FRAME

The 695 ZR (ZED READY) boasts all the LOOK technology in the frame and fork, but does without the ZED crankset and Aerostem. The frame is nevertheless still compatible with these two components and can also be fitted with any other crankset and stem. It is competition-oriented and gives you a choice from an à la carte configuration.


HSC 7 FORK

The HSC 7 fork is 15% stiffer and 16% lighter than the HSC 6.
It is 100% one-piece carbon, weighs just 295 g and complies with standard EN 14781 (144 joules frontal impact). The carbon dropouts are moulded and compressed as seamless extensions of the fork.
The tapered steering tube uses the CFD (Continuous Fibre Design) concept and enables the bearings to be located directly on the fork crown (oversize for 1½ inch bearings).
The steering tube has 2 flats and is reinforced to take the Head fit 3 headset.

HEAD FIT 3 HEADSETS + RISER

LOOK patented headset dissociating headset adjustment from stem tightening.
The headset is adjusted by tightening the carbon ring on an offset thread locked onto the steering tube. It is now possible to change stem height without altering headset adjustment. This arrangement does away with the compression kit, replaced by a simple cap. Weight savings: 40 g. The 3rd generation of the Headfit is completely integrated into the head tube thus further optimising steering precision.
The 695 ZR includes a screwed riser which secures the headset and is where the head tube meets the stem.


E-POST SEATPOST (E = ELASTOMER) WITH VARIABLE HARDNESS

1/ Anti-rotation: not being round, the E-post is therefore always aligned to the frame centreline.
2/ The seatpost is butted up against the frame.
3/ Vibration damping: via elastomers (2 internal and 1 external).
4/ Tightening consistent with carbon: 5 Nm torque is sufficient
5/ Three elastomers of varying hardness are included.
The 695 ZR is compatible with mechanical and electronic groupset configurations (Di2 et EPS). This is achieved through removable (mechanical) sheath stops (a LOOK patent). Once the mechanical stops have been removed, an adaptor kit for electronic units is included with the frame for 100% integrated routing of the harnesses (passing through the bottom bracket shell).


Technical Data
Shimano Ultegra Mechanical Groupset Specifications

FRAME / FORK 695  / HSC 7 FORK
HEADSET LOOK HEADFIT 3
SEAT POST LOOK E-POST
CRANKSET SHIMANO ULTEGRA 6800 50X34
CASSETTE SHIMANO 105 11V 11X32 5800
BRAKES / SHIFT LEVERS SHIMANO ULTEGRA 2X11V 6800
REAR DERAILLEUR SHIMANO ULTEGRA 6800
FRONT DERAILLEUR SHIMANO ULTEGRA 6800 BRAZE-ON
CHAIN SHIMANO HG600
BRAKE CALIPER  SHIMANO ULTEGRA BR6800
SADDLE SELLE ITALIA FLOW
HANDLEBAR FSA VERO COMPACT
STEM FSA OMEGA +/-6°
BAR TAPE LOOK GRIP
PEDALS N/A
WHEELS MAVIC AKSIUM
TIRES CONTINENTAL ULTRA SPORT II 700X25
WEIGHT 7.5 KG

SHOP WITH 100% CONFIDENCE